UPS Aviation Technologies 10 User Manual Download Page 14

UPS Aviation Technologies

SL10 Series Audio Selector Panel and Intercom System

User’s Guide

Page 10

Section II- Warranty and Service

2.1 Warranty

In order for the factory warranty to be valid, the installations in a
certified aircraft must be accomplished by an FAA- certified avionics
shop and authorized UPS Aviation Technologies dealer. An FAA Form
337 must also be accompanied by the warranty card for this warranty to
be in effect.  If the unit is being installed by in an experimental aircraft
by the owner/builder, a factory-made harness must be installed for the
warranty to be valid.
UPS Aviation Technologies, Inc. warrants this product to be free from
defect in material and workmanship for a period of three (3) years from
the date of installation (on units shipped after Jan 1, 1999). During the
first twelve (12) months of this three-year warranty period, UPS Aviation
Technologies, Inc., at its option, will send a replacement unit at our
expense if the unit should be determined to be defective after
consultation with a factory technician. In the following twenty-four (24)
months the unit must be returned to UPS Aviation Technologies, or a

certified

 UPS Aviation Technologies 

Service Center

, for repairs.

This warranty is not transferable. Any implied warranties expire at the
expiration date of this warranty. UPS Aviation Technologies SHALL
NOT BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL
DAMAGES. This warranty does not cover a defect that has resulted from
improper or unreasonable use or maintenance as determined by us. This
warranty is void if there is any attempt to dissemble this product without
factory authorization. This warranty gives you specific legal rights, and
you may also have other rights which may vary from state to state. Some
states do not allow the exclusion of limitation of incidental or
consequential damages, so the above limitation or exclusions may not
apply to you.

2.2 Factory 

Service

The unit is covered by a 26-month limited warranty. See warranty
information. Call UPS Aviation Technologies, Inc. at (800) 525-6726
before you return the unit. This will allow the service technician to
provide any other suggestions for identifying the problem and
recommend possible solutions. After discussing the problem with the
technician and you obtain a Return Authorization Number, ship the
product to:
UPS Aviation Technologies, Inc.
2345 Turner Road, S.E.
Salem, OR 97302             U.S.A. Toll Free  800.525.6726

Summary of Contents for 10

















Reviews: