GENERAL INSTRUCTIONS
Included in this manual are instructions for: Proper assembly, care and maintenance of
product, safety tips, warnings, and proper use; in order to ensure a secure and fun use of
the trampoline. All users and supervisors must read and familiarize themselves with all
these instructions and all other information in this manual.
As with any type of recreational physical activity, without being careful participants can be
injured. Anybody who chooses to use this trampoline must be aware of their own limitations
in regards to performing various jumps and bounces with this trampoline. Trampolines are
rebounding devices which propel the performer to unaccustomed heights through a variety
of movements, so initially; you should get accustomed to the feel and bounce of the
trampoline. The focus must be on your body position, and you should practice each
fundamental bounce until you can do each bounce with skill before moving on to more
difficult and advanced bounces. Do not behave recklessly on the trampoline, emphasis
must be made on good control and the mastering of various bounce techniques.
¾
The assembly of the product must be done carefully by at least two able-bodied
adults. Contact us, or ask any technically qualified person if you have any difficulties.
¾
Beware that when using tools or doing technical work, there is always a risk of
injury, so assemble the product carefully, and use gloves to protect your hands.
¾
Work in a danger free environment, do not leave tools or hazardous materials
scattered around the workspace.
¾
Place trampoline on level and non-slippery ground, preferably on grass. Locating
the trampoline on a hard surface will add stress to the frame and over time cause
damage which is not covered by warranty. Placing the trampoline on uneven
surfaces could result in the trampoline tipping over.
¾
A clearance space of at least 24ft is necessary above the trampoline. An appropriated
clearance must be kept between the trampoline and possible sources of danger, such
as electric cables, tree branches, playing devices, swimming pools and fences.
¾
After assembling the trampoline according to the instructions, please make sure that
all screws, bolts and nuts are correctly installed and tightened, and that all joints are
tightly sealed.
¾
For additional stability you can place sand bags on the trampoline legs. This will
prevent the trampoline from tipping over in the event of any sideward force.
¾
Remove all packaging materials and lay down all parts on a free space. This gives
you an overview and simplifies the assembly procedure. Check with the parts list
that no parts are missing and dispose of the packaging material when the assembly
is completed.
Proper Assembly
