连接接口
Specification
连接接口
4 Ports PoE Ethernet Switch
3
4
Specification change will not be noticed
4 Ports PoE Ethernet Switch
Trouble Shooting
Please follow the steps if the equipment has trouble.
Make sure the equipment is installed according to the manufactures installation guide.
Confirm RJ45 cable order meets EIA/TIA568A or 568B standard.
Every PoE port can provide PoE equipment maximum power less than 30W, please do not
connect the PoE equipment with power over 30W.
Replace the equipment with a proper functioning 4 ports PoE Ethernet Switch to check if
the equipment is damaged.
Please contact your vendor if trouble still exists.
Instruments to be used: wire crimper, network tester. Wire sequence of RJ45 plug should
conform with EIA/TIA568A or 568B.
1) Please remove 2cm long the insulating layer, and bare 4 pairs UTP cable;
2) Separate the 4 pairs UTP cable and straighten them;
3) Line up the 8 pieces of cables per EIA/TIA 568A or 568B;
4) Cut off the cables to leave 1.5cm bare wire;
5) Plug 8 cables into RJ45 plug, make sure each cable is in each pin;
6) Use the wire crimper to crimp it;
7) Repeat above 5 steps to make the another end;
8) Use network tester to test the cable if it works.
Plug Producing Method
Pin
Color
White/Green
Green
Blue
White/Orange
White/Blue
/
White Brown
Orange
Brown
1
2
3
4
5
6
7
8
Pin
Color
1
2
3
4
5
6
7
8
White/Green
Green
Blue
/
White Orange
White/Blue
White/Brown
Orange
Brown
EIA/TIA 568A
EIA/TIA 568B
When choose RJ45 make sure if one end is EIA/TIA568A,the other end should also be EIA/TIA568A.
When choose RJ45 make sure if one end is EIA/TIA568B,the other end should also be EIA/TIA568B.
Notice
Item
Description
Power
Power Supply
Power Adaptor
Voltage Range
DC48V~54V
Consumption
＜5W
Ethernet
Speed
1 4 port Default:10 100Mbps
CCTV:10Mbps;
UPLINK 100Mbps
-
:
/
;
:
Transmission Distance
1 4 port:Default 0 100m;
CCTV:0~250m;
UPLINK:100m
-
: ～
Network Switch
Ethenet Standard
IEEE 802 3 802 3u/802.3af/at
. /
.
Exchange Capacity
1.0Gbps
Packet Forwarding Rate
0.74Mpps
Packet Buffer
768K
MAC
2K
Status Indicator
Power Light
1pc(Red)
Ethernet Port Light
2pcs(Yellow&Green) on RJ45 yellow indicates PoE,
green indicates Link Act
,
/
Surveillance Module Light
1pcs(Green), green indicates CCTV
Protection Level
Pluse Group
Level 3
Standard: IEC61000 4 4
- -
ESD
1a Contact Discharge Level 3
1b Air Discharge Level 3
Standard: IEC61000-4-2
Anti thunder Level
-
6KV
Standard: IEC61000 4 5
- -
Working
Environment
Working Temperature
-
℃
10 ~55℃
Storage Temperature
-
~
℃
40
85
℃
Humidity Non condesing
(
-
)
0 95
~
%
Mechanical
Dimension L W H
( * * )
135mm 85 6mm 27mm
×
.
×
Out Shell
Galvanized Sheet
Color
Black
Weight
315g
Power/Distance
54V
Distance
100m
150m
200m
250m
Power
26W
24W
23W
21W
