11
FCC & INDUSTRY CANADA
REGULATORY COMPLIANCE
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference;
and (2) this device must accept any interference received, including interference
that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a residential
installation.
This equipment generates, uses and can radiate radio frequency energy. If not
installed and used in accordance with the instructions, it can cause harmful
interference to radio communications. Interference may occur in a particular in-
stallation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, try to
correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment to an outlet on a circuit different from that which
the receiver is connected to.
• Consult the dealer or an experienced technician for help.
R&TTE
CE0889, 0682
The Uplink 2500EZ Universal GSM Alarm Communicator has been fully tested
and complies with the requirements of EN301 489-1 V1.8.1:2008, EN301 489-7
V1.3.1:2005, EN60950-1:2006+A11:2009, EN62311:2008, and EN50130-4:1995.
Compliance to EN301 511:2003 V9.0.2:2003 has been demonstrated.
UNIVERSAL GSM
ALARM COMMUNICATOR