© UPLIFT Desk
• 800-349-3839 • [email protected] • upliftdesk.com
Seat Height
Adjust by twisting the lever on the right side of the seat. Stand
up to raise the chair higher or sit down in the chair to lower it.
Seat Depth
Adjust by pulling out the handle on the right side near the front
of the Seat. Slide the seat forward or backward to your preferred
position, then push the handle back in to lock it into place.
Adjustment Guide
Back Tilt Adjustment
To unlock the Back, move the lever on the left of the Seat into the
UP position. This allows the back to “free float” with you as you
move and recline to any position you wish within the chair’s range
of recline. To lock the Back, move the lever into the DOWN position.
If you prefer the back to be stationary, angle the seat to your pre
-
ferred position and twist the lever DOWN. This will lock the chair at
the closest preset angle. There are three preset positions.
To unlock the back again or to change positions, flip the lever back
and press back slightly in the chair to disengage the lock.
locked
unlocked
Lumbar Height
To adjust the chair’s lumbar support, grab the tabs on either side
of the lumbar on the back of the chair and slide it to the position
that best supports your lumbar region.
Arm Height
Adjust by pressing the button underneath each armrest to un
-
lock and gently move them up or down to the height that best
supports your arms.
Flexible Back
The Vert moves with you as you move throughout a variety of
positions. A flexible back that mimics the spine allows the chair
to automatically adjust with your body for more supportive and
active seating.
