Uplift Desk UPL961 Quick Start Manual Download Page 2

Please read these instructions carefully. This desk is height adjustable to fit the user’s height. 

Inappropriate use of this desk can cause property damage and/or bodily injury. Under no circumstances 

does the manufacturer accept warranty or liability claims for damages caused from improper use of this 

desk. Please provide these instructions to any new user or owner of the desk.

WARNING: 

Keep fingers and body parts clear of the moving desk. Check the desk’s surroundings 

on all sides before raising or lowering the desk to ensure there are no obstacles that can be 
damaged or can damage the desk.

WARNING: 

Ensure all cords and cables have enough slack so they don’t pull as the desk moves up 

and down.

WARNING: 

Keep children away from the desk unless supervised. Misuse of the desk can cause 

personal injury. If children cannot be supervised at all times, use the desk’s safety lock feature or 

remove the power cord to prevent its operation.

WARNING: 

The desk is designed for use in dry environments, use indoors only. Use of desk 

outdoors or in damp locations can cause risk of electric shock, fire, or personal injury.

WARNING: 

Only plug the desk into a properly grounded, 120V power outlet. Using a voltage 

converter is considered improper use and can cause damage to the desk.

WARNING: 

Do not open or insert any object into a desk frame component such as the motor 

housing or control box. Doing so may cause damage and presents a risk of electric shock.

WARNING: 

In case of spilled liquid on any desk component, disconnect the desk from the power 

outlet immediately. Clean up the spill with a dry cloth and plug the desk back into the power outlet. 

There is a risk of desk failure or electric shock if desk components become wet.

WARNING:

 Never use the desk if the power cord or plug is damaged as this can cause a risk of fire 

and electric shock. Contact UPLIFT Desk for a replacement power cord if it is damaged in any way.

WARNING:

 Risk of serious injury or death. Adjusting the height of the desk can pinch or crush body 

parts trapped between the desk and stationary objects. Do not place feet or other body parts on any 
items located under the desk other than on approved items such as foot rests and desk mats.

WARNING:

 Be sure there is a gap of at least 1 inch between the moving parts of the standing desk 

and objects located next to it to avoid pinch and crush hazards. Move the desk through its full 
range of motion to ensure the 1 inch gap is maintained above, below, and all around the desk. 

WARNING: 

Persons with limited mental or physical capabilities who are unable to comprehend the 

safe operation of the height adjustability feature must not operate the desk.

WARNING:

 Inspect the desk regularly and stop using immediately if you notice any damaged or 

loose parts. Only replace damaged desk parts with authorized UPLIFT Desk parts and instructions.

Safety and Warnings

Summary of Contents for UPL961

















Reviews: