© UPLIFT Desk
• 800-349-3839 • [email protected] • upliftdesk.com
A Warning Before Use:
When the light is lowered down, the space between the
arm’s first segment and the stabilizing metal bar can
tighten and become a pinch point. To avoid injury, do
not put your fingers or any part of your body in this area.
150°
Adjustment Information
Hinge tightness
There are two Allen Wrenches included with your
Lamp. The large one will fit into the lower hinges and
the small one can be used at the smaller hinge close
to the Lamp.
Use them to tighten or loosen the hinges as needed.
Lamp Rotation & Tilt
Lamp head will rotate right and left 200 degrees. Ad
-
just the Lamp head’s tilt by loosening the knob under
the lamp head. Rotate to your preferred angle and
tighten the knob to set the lamp head in place.
Wide Range of Adjustabilty
The Lamp’s arm can rotate a total of 150 degrees at
the base, and can be adjusted at the joints to allow for
several different Lamp positions.
Dimming Feature
Touch and hold the power button to dim the light to
its dimmest setting. To dim halfway, press and hold
the power button and then release it when it reach-
es the medium brightness you prefer. The Lamp will
remember this brightness after you turn the lamp off.
Touching and holding the power button again will
bring the light back to its previous highest or lowest
setting.
Light Temperature Options
Tapping the power button will cycle through the
Lamp’s three temperature settings:
• 3000K
• 4000K
• 5000K
