Uplift Desk STR041 Assembly Instructions Download Page 3

© UPLIFT Desk

 •  800-349-3839 • [email protected] • upliftdesk.com

STEP 5 

(Optional)

A. 

Letter and legal-size hanging file folders will 

hang lengthwise on the Hanging Folder Bar and 

back edge of the bottom drawer, leaving storage 

space at the front of the drawer. 

B.  To move the Hanging Folder Bar, lift up on one 

end and gently pull the side of the drawer out to 

disengage the bar, then rotate slightly and lift 

the bar to disengage the other end.

C. 

For letter file folders, install the bar in the slots 

located closest to the back of the drawer. Note 

the orientation of the bar, the folded edge of the 

bar should face toward the front of the drawer.

D. 

For legal file folders, install the bar in the slots 

located closest to the front of the drawer. Note 

the orientation of the bar, the folded edge of the 

bar should face toward the front of the drawer.

STEP 6 

(Optional)

A.  If you want to lock all 3 drawers, simply 

insert one of the Keys and rotate it 180° 

counterclockwise. To unlock the drawer, turn the 

key back 180° clockwise. The lock will secure all 3 

drawers.

B.  If you’d like to keep your key in the lock to avoid 

losing it, just flip the tab down so it doesn’t get 

snagged on your clothes or personal items. 

CAUTION: 

Read all instructions before assembly. Failure to assemble properly may result in damage or 

personal injury.

WARNING: 

Do NOT stand or sit on the unit. Do not sit on, stand in, or lean on open drawers.

CAUTION: 

To prevent the unit from tipping over, only have one drawer open at a time.

CAUTION: 

To prevent tipping, the max load of the top 2 drawers is 10 lbs each and the max load of the 

bottom drawer is 35 lb.

CAUTIONS & WARNINGS

!

!

!

!

!

Letter

Legal

Summary of Contents for STR041

Page 1: ...r mounting holes located at the 4 corners of the bottom surface D Put a Split Lock Washer on the stem of a Front Locking Caster and place the stem through one of the front holes E From the inside of the bottom surface thread a Flange Lock Nut onto the Front Locking Caster stem Use one 14 mm Flat Wrench to hold the integrated caster nut and tighten the Flange Lock Nut with the other 14 mm Flat Wren...

Page 2: ...friend can now safely turn the File Cabinet over to its upright position C Test the casters by rolling the File Cabinet around a bit to ensure it is stable D Insert the Support Caster Pin into the hole inside the bottom drawer This will secure the Support Caster in place and keep it from dislodging STEP 3 Optional A To keep your File Cabinet stationary simply flip the tabs on the 2 Front Locking C...

Page 3: ...front of the drawer Note the orientation of the bar the folded edge of the bar should face toward the front of the drawer STEP 6 Optional A If you want to lock all 3 drawers simply insert one of the Keys and rotate it 180 counterclockwise To unlock the drawer turn the key back 180 clockwise The lock will secure all 3 drawers B If you d like to keep your key in the lock to avoid losing it just flip...

Page 4: ...s manual to the buyer installers or support personnel operating the product SAVE THE INSTRUCTIONS Copyright Notice This guide is a component of this UPLIFT Desk product This guide is a part of the scope of delivery even if the item is resold This guide is also available on the UPLIFT Desk website upliftdesk com These instructions are subject to United States copyright law ...

Reviews: