© UPLIFT Desk
• 800-349-3839 • [email protected] • upliftdesk.com
Seat adjustment
Height-
To adjust the height of your seat higher or lower,
squeeze the latch located underneath the seat. Sit on the seat
to lower it and stand up to allow the seat to rise. (fig 1)
Depth-
To adjust the depth of your seat, engage the tab locat
-
ed under the seat and slide the seat to your preferred position.
(fig 2)
(fig 2)
(fig 1)
Adjustment Guide
Back Tilt Adjustment
When the latch is UP, the back is locked. When it’s pushed back,
the back is unlocked. This allows the back to “free float” and recline
to any position you wish within the chair’s 22 degrees of recline.
If you prefer the back to be stationary, there are 4 preset locking
positions in this mode. Simply recline the back to the desired posi
-
tion and flip the latch UP to lock into the nearest forward position.
To unlock the back again or to change positions, flip the switch
back and press back slightly to disengage the lock.
Back Height
Hold the back firmly to lift or lower the back height to your de
-
sired height. There are 4 locking positions, with a height range
of 2.4’’ (.6’’ per position).
Arm Height
Press the button on each arm to unlock them, and move the
armrests up and down. There are 6 locking positions, with a
height range of 2.8’’ (.6’’ per position).
Copyright Notice:
These instructions are a component of the UPLIFT J3 Ergonomic Chair. These instructions are part of the scope of delivery, even if the item is resold. These instructions are also available
on the UPLIFT Desk website: upliftdesk.com. Excerpts or copies may not be forwarded to third parties or used in any other published form without the prior written consent of UPLIFT Desk.
These instructions are subject to United States copyright law.
©
Headrest adjustment
Height-
Hold the headrest firmly to lift or lower it to your
desired height.
Tilt-
Hold the headrest firmly and adjust it at an upward or
downward angle to the position where it’s most comfortable.
AI-CHR456-2.1
CAUTION:
Read all instructions before assembly. Failure to assemble properly may result in
damage or personal injury.
WARNING:
This product’s maximum weight capacity is 250 lb (113.4 kg). DO NOT exceed the
maximum weight capacity.
CAUTIONS & WARNINGS
!
!
!
