4
UPLIFT Desk 1-800-349-3839
3
10
5.
ASSEMBLY INSTRUCTIONS
A.
Lay out all components and hardware
to ensure that you have all the components
and hardware listed on the parts page.
Place four (4) self-adhesive Adhesive Pads
(Part #4) on each of the four (4) Zero
Crossbar Brackets (Part #3) as shown.
B.
Place each Zero Crossbar Bracket (Part #3) on the underside of the desktop. Carefully measure
from all sides and attach the Zero Crossbar Brackets (Part #3) to the underside of the desktop with
twenty-four (24) Pan Head Screws (Part #10), six (6) per bracket.
Double-check that the wood screws
are not too long for the desktop
and won’t puncture the surface
when screwed all the way in.
We reccomend that you pre-drill any holes needed
for fasteners connecting the Brackets (Part #3) to
the underside of the desktop (if your desktop
is not pre-drilled). Never use countersunk screws
i
3
4
!
