© UPLIFT Desk
• 1-800-349-3839 • [email protected] • www.upliftdesk.com
®
View
™
Laptop Holder Instructions
ACC303
Part 1
View™
Laptop
Holder
Part 2
Side brace
(qty 2)
Part 3
Brace clamp
(qty 2)
Part 4
M4x12mm screw
(qty 2)
Step 1
Attach the side braces to the View™ Laptop Holder (part 1) , place the side
brace (part 2) under the tray, as shown in fig. 1; and affix the brace clamp
(part 3) through the opening and snap it into the Side Brace.
This will hold
the side brace in place so it can move up and down.
Flip the latch on the back of the side-brace to extend their widths.
Fig. 1
Fig. 2
Fig. 3
Fig. 4
Step 2
To attach the tray at a more level angle, slide the upper set of pegs
onto the VESA plate’s open holes. Use the two M4x12mm screws (part 4)
and hand-tighten.
Package Contents:
