13
14
Installation of loudspeaker in the front door
Installation of loudspeaker in the front door
Step 5
Pull off the paneling and then remove the foam rubber on the back side.
Begin in the upper
corner.
Plug in the connector of the tweeter cable and fix the crossover network (in the cable) with
the adhesive rubber foam cut which are added.
The following illustration shows the tweeter paneling from the back side
1. with tweeter
2. the foam rubber
3. without the tweeter
Step 6
Installation of the tweeters
Carefully remove the tweeter. For this purpose
pry open the 3 fastening points with a slot
screwdriver.
Cut 3 parts from the included adhesive ring and
place them on the tweeter as shown.
The entry openings (arrows) must remain free.
Remove the protective paper from the adhesive
parts and fit the tweeter on the pins of the
loudspeaker openings of the mirror triangle cover
in the original position.
To be on the safe side glue each of the 3 pins with
normal commercial 2-component glue.
Step 4
Carefully pry the clips beginning at the
bottom. Then pry the door paneling carefully
out of the window slot as shown in the next
illustrations.
To dismantle the clips you can also use tools
(e.g. slotted screwdriver). Be very careful to
avoid scratches while working. Afterwards,
lift the door panelling carefully out of the
window slot from the outer door-side.
Attention!
First loosen the door opening cable. Lift the flap and pull the cable
backwards out of the guide.
Afterwards remove the hook in front on the plastic lever.
Loosen the plugs for window regulator and other features.
Pry possibly remaining clips out of the door and re-insert them in the door
paneling.
