PLACEMENT IN THE CHAIR
Generally, the UPEASY Seat Assist should
overhang the front of the chair as shown.
On chairs which are very deep, it is permissible
to position the cushion further back. When using
the UPEASY, keep both hands on the arms of
the chair (or other suitable support).
Note: The UPEASY Seat Assist should overhang as
shown when used on a hard chair.
GETTING UP WITH UPEASY
When you are ready to stand, simply start to get up like you
normally would, by leaning slightly forward and pushing off with
your arms and legs. UPEASY will sense you are getting up and give
you a slow and gentle lift up.
SITTING DOWN WITH UPEASY
After adjusting the weight settings and placing the UPEASY on
your chair, sit down on the flat part at the top of the cushion. The
UPEASY will ease you slowly and gently into your chair.
Note: If the cushion does not go down when you sit on it, re-adjust the
weight setting to a lower weight.
The cover on your UPEASY Seat Assist is made of
100% polyester and can be removed and machine
washed (hang to dry).
The surface of the UPEASY cushion is coated with
a special water-resistant coating. This may be sponge
cleaned with mild soap or detergent.
Note: Never totally immerse your UPEASY
Seat Assist in water.
To put on the cover after cleaning:
Adjust the weight setting on your UPEASY
Seat Assist and place it on a table with the
open end facing away from you.
Place the end of the
cover with the tag
over the back or top
of the cushion and
pull it down and
under the front edge.
Note: The back or top end of the cover is made
wider than the front to ensure proper fit. It is best
to leave all or part of the tag on your cover so that
it is easy to identify this back/top end in the future.
CARING FOR YOUR SEAT ASSIST
1
2
3
1
2
3
1
2
