Programmable Positioning Control
ECS+ has programmable
personal standing height
positioning control and a low limit control used to
avoid collision with obstacles placed under the work surface such as cabinets and pedestals (allow 3.75”
below the underside of the desk top for the frame assembly)
Setting the memory
: Adjust your table to the first position of your choice. Press both buttons 3 times
(0.5-1 seconds between each press) Do the same procedure for your second choice. The table will do a
gentle rise to confirm the setting. To erase the setting, follow
manual reset
in section 3.2.
To bypass this position and go 'outside' the setting you just hold the button for 5 seconds and the desk
moves again.
AutoDrive (optional)
A quick double press will drive the table automatically to the end position or to the programmed
position.
Advanced functions. Manuel Reset
In case of exchanged parts (i.e. motor, electronics) there could be a need of a manual reset so columns
and handsets correspond to each other. Even poor connection of the cables could create a need of
resetting.
