Small Hole
(align behind
Large Hole)
Facet with
Large Hole
(align in front
of Small Hole)
ASSEMBLY
Page 5 of 7
A
A.
Peel protective masking off
Tower Panels (H)
before assembly.
B.
Overlap each
Tower Panel (H)
so the large hole
of facet lies outside the small hole of
adjacent panel.
(see figure RIGHT)
C.
Use Large Finger Holes
(see figure RIGHT)
to hold
Tower Panels (H)
tightly
together while installing
Push Pins (A).
D.
Join (3)
Tower Panels (H)
together
using (12)
Push Pins (A).
(see figure BELOW)
9
H
H
Tower Panels
(H)
MUST be aligned properly
at facets BEFORE securing
with
Push Pins (A).
NOTE:
Push Pins CANNOT be
removed once
inserted into holes!
(finger hole)
(finger hole)
(finger hole)
A
Top of
Tower Panel
(No Slot)
Bottom of
Tower Panel
(With Slot)
U.S. PATENT NO.
8,534,472
upcdisplays.com
