Page 2 of 2
ASSEMBLY
upcdisplays.com
Attach (2) Hinges (C) to Front Panel (P)
from 8089 using (4) Screws (B).
Attach Front Panel (P)
from 8089
to
assembly by snapping hinges into hinge
plates attached to Base (F).
See DETAIL bottom right.
Peel masking paper and attach (4)
Caps (D) to cover screw holes in front side
of Front Panel (P)
from 8089
.
Continue assembling full fixture according
to directions included with 8089.
2
D
P
B
C
P
Hinge
Plates
F
1) Place hinge in slightly inclined
position and slide front hook
under baseplate hook.
2) Push hinge end with finger and
snap hinge into mounting plate.
1)
2)
HINGE ATTACHMENT DETAIL
C
