UPC 65454-A Assembly Instructions Download

Page: 2 / 4

Page 2 of 4

ASSEMBLY

- (Refer to Diagram below)

Cut existing Power Cord

and Power Adapter from

current hanging

Back Lit Sign Display.

Remove

(12) Plastic Screws

with a

Phillips screw driver. Then remove and

retain signage from existing Back Lit Sign

Display. Dispose of existing Housing.

Note: Retain (12) Plastic Screws.

To remove

(12) Plastic Screws

unscrew with a Phillips screw driver.

and push from rear.

Cut Cords

Existing Housing

Dispose of

Power Adapter

and Power Cord

AFTER CUTTING!!!

Plastic Screws

Summary of Contents for 65454-A

Page 1: ...from power strip and remove from rack Remove Existing LED Sign from Cross Bars and Cut cord on Existing LED Sign Finished Display REPLACEMENT PARTS ASSEMBLY PARTS LIST Thank you for your purchase of...

Page 2: ...stic Screws with a Phillips screw driver Then remove and retain signage from existing Back Lit Sign Display Dispose of existing Housing Note Retain 12 Plastic Screws To remove 12 Plastic Screws unscre...

Page 3: ...A until it locks in place NOTE Dispose of existing Housing G Page 3 of 4 ASSEMBLY 5 5 Connect New Power Adapter B to New Power Cord C Hang LED Sign on Cross Bars using Brackets on back of sign Make s...

Page 4: ...er Adapter Cord B C on top of Power Strip Feed cord from LED sign E under store signage and connect to New Power Adapter Cord B C 8 7 Plug New Power Adapter B C into Power Strip Power Strip Power Stri...