UPC #2231A 3-Tier 48" Break Resistant PETG Card Rack
Revised 06/19/14
Page 1 of 2
PARTS LIST
ASSEMBLY
G
F
F
PART Quantity Reference
Screw Post
3
A
Slatwall Adapters
3
B
#8 - 32 Hex Nuts
3
C
Plastic Wall Toggler
3
D
Philips Head Screws
3
E
PARTS BAG
PART Quantity Reference
Rack
1
F
Divider
8
G
TOOLS REQUIRED: Flathead Screwdriver (Slatwall)
Drill with 3/8” Drywall Bit & Phillips Screwdriver (Drywall)
A
B
C
E
D
ASSEMBLY INSTRUCTIONS
Align hole in Slatwall Adapter (B) with
back side of hole in Rack (F). Prongs extend
back toward Slatwall and up. Attach using
Screw Post (A) from front and Nut (C)
on back.
Slatwall Assembly
1
Insert Divider (G) into
Rack (F).
2
G
NOTE: Assemble for EITHER Slatwall or Drywall, not both.
C
B
A
C
B
A
C
B
A
