Small Hole
(align behind
Large Hole)
Facet with
Large Hole
(align in front
of Small Hole)
ASSEMBLY
A
9
H
Tower Panels (H)
MUST be aligned properly
at facets BEFORE securing
with Push Pins (A).
NOTE:
Page 5 of 7
Push Pins CANNOT be
removed once
inserted into holes!
A
A. Peel protective masking off
Tower Panels (H) before assembly.
B. Overlap each Tower Panel (H) so the large hole
of facet lies outside the small hole of
adjacent panel.
(see figure RIGHT)
C. Use Large Finger Holes
(see figure RIGHT)
to hold
Tower Panels (H) tightly
together while installing Push Pins (A).
D. Join (2) Tower Panels (H) together
using (8) Push Pins (A).
(see figure BELOW)
(finger hole)
(finger
hole)
(finger
hole)
(finger
hole)
(finger
hole)
(finger
hole)
H
H
(finger hole)
close up view
Top of
Tower Panel
(No Slot)
Bottom of
Tower Panel
(With Slot)
U.S. PATENT NO.
8,534,472
