18
Value range: [30–45]; default value: 37.3
Temperature
Alert
The options are
On
and
Off
. Set the parameter based on the actual
conditions. The default value is
Off
.
After turning on the temperature alert, when body temperature is
within the range of temperature alert threshold and temperature alarm
threshold, high temperature alarm will be given to remind people to re-
detect.
Temperature
Alert Offset
Temperature Alert Threshold = Temperature Alarm Threshold -
Temperature Alert Offse
Alarm Output Configuration
High
Temperature
Alarm
The options are
On
and
Off
. Set the parameter based on the actual
conditions. The default value is
Off
.
After turning on the high temperature alarm, terminal will output a
high temperature alarm when digital detection module detects high
temperature.
(3)
Click
Save
to complete the configuration.
3.4.4
Ports & Devices
1. IO Configuration
The device has an alarm output interface which can connect to alarm light, alarm bell and so on. When the high
temperature alarm is triggered, it will output a high or low level signal. Perform the following operations to
complete configuration:
(1)
Choose
Setup
>
System
>
Ports & Devices
and click the
IO Configuration
tab.
(2)
Configure the Alarm Output information. Select the check box in the front. Then, the configuration of the
Alarm Output
will take effect.
Level Value
can be set to
Low Level
or
High Level
. The value should be
consistent with the input and output signal level supported by external devices. The pulse width value here
indicates the duration of the set level value.
(3)
Click
Save
to complete the configuration.
NOTE!
In order to use the alarm output function normally, please make sure that the high temperature alarm is turned
on. For details, please see
2. Volume Control
If the device connects to an audio device, configure audio information on the
Volume Control
tab page.
(1)
Choose
Setup
>
System
>
Ports & Devices
and click the
Volume Control
tab.
