17
Parameter
Description and Configuration
DST
The options are as follows:
On
Off
The following parameters are configurable only when
DST
is set to
On
.
Start Time
Set the parameter based on actual conditions.
End Time
Set the parameter based on actual conditions.
DST Bias
The options are as follows:
30mins
60mins
90mins
120mins
Set the parameter based on actual conditions.
(3)
Click
Save
to complete the configuration.
3.4.3
Advanced Setting
(1)
Choose
Setup
>
System
>
Advanced Setting
.
(2)
Set parameters by referring to the table below.
Item
Description
Attribute Rule
Configuration
Temperature
Measurement
Temperature
Measurement
Measure Forehead Temperature: The forehead temperature will be
measured.
Measure Wrist Temperature: The wrist temperature will be
measured.
Do not need configuration. Terminal will automatically match the
temperature measurement mode when it is connected to the digital
detection module.
Temperature
Measurement
Range
Value range: [30–45]; default range: [35–42]
Configure the range based on actual application scenes.
Temperature
Alarm
Threshold
When the digital detection module detects a temperature higher than
the threshold configured here, the "abnormal temperature" alarm is
displayed on the GUI and the warning sound is played.
