5
Parameter
Parameter Description and Configuration
IP Address
Enter the IP address of the device.
The IP address of the device must be unique across the network.
Subnet Mask
Enter the subnet mask of the device.
Default Gateway
Enter the default gateway of the device.
(3)
Tap
Save
to complete network setting.
2.3.3
Change Password
To change the configured activation password, do as follows:
(1)
On the
Activation Config
interface, tap
to go to the
Change Password
interface.
(2)
Enter the old password, new password, and confirm the new password as required.
NOTE!
The password must contain at least eight characters (including at least two of the following types: upper case
letters, lower case letters, digits, underscores, and hyphens).
The confirmation password must be consistent with the new password.
The activation password is consistent with the password for the
admin
to log in to the Web interface. If the
activation password is changed, use the new password to
(3)
Tap
Save
to complete the activation password change.
