- 2 -
OPERATION
Menu extension
Auto operation
Music operation
Manual operation
DMX operation
DMX start address setting
The LED display allows you to extend or abbriviate the menu.
Press the Menu button.
Press the Up or Down buttons until it shows -Menu- in the display.
Press Enter button to enter setting.
Press the Up or Down buttons to select -on- or -oFF-.
Then press the Enter button to save or press the Menu button to exit.
If you select -on-, then the menu is complete.
If you select -oFF-,then the menu is incomplete. The display will only show the -AXXX- for DMX
control mode and -Menu- for Menu extention.
Press the Menu button until it shows one of FLAS/FADE/ASC-.
They mean strobe, fade in and fade out, and color change effect.
Press Up or Down button to select one of them, the device will be
operated automatically by the built-in programs.
Press Enter button, the last 2 digits in the display will show 00-12.
This is the speed or different built-in programs.
Press Up or Down button to select.
Press Enter button to save or press Menu button to exit.
Press the Menu button until it shows SouF or Soud. This means
two different modes of sound-active effect.
Press Up or Down button to select.
Press Enter button to save (the device will be operated by the
music signal received by the built-in micro-phone) or press Menu button to exit.
Press the Menu button until it shows C1/C2/C3/C4 in the display.
They mean Red, Green, Blue and White color respectively.
Press Up or Down button to select C1, C2, C3 or C4.
Press the Enter button, the last 2 digits in the display will show 00-
12. This is the level of the manual dimmer.
Press Enter button to save or press Menu button to exit.
Only use a stereo shielded cable and 3-pin XLR-plugs and connectors in order to connect the con-
troller with the fixture or one fixture with another.
This device has 3 channel modes, maximum10 channels.
Press the Menu button until it shows AXXX in the display. XXX is the
address you set last time.
Press Up or Down button to select your desired address, etc, A001.
Press Enter button to save or press Menu button to exit.
- 3 -
The wires must not come into contact with each other, otherwise
the fixtures will not work at all, or will not work properly.
DMX control mode selection
Mode 1:
This device has no white color so some channels has no function.
This device has 3 different DMX control mode: Mode 1-3. If two, three
or more devices are set to same control mode, they will work similarly.
Press the Menu button until it shows ModX in the display. X is one of
figures 1-3.
Press Up or Down button to select your desired mode, etc, Mod1.
Press Enter button to save or press Menu button to exit.
Press rSEt and switch off to ensure.
MENU
MENU
SAVE
SAVE
MENU
SAVE
MENU
SAVE
MENU
SAVE
MENU
SAVE
MENU
SAVE
MENU
SAV E
MENU
SAVE
MENU
SAVE
MENU
SAVE
MENU
SAVE
MENU
SAVE
MENU
SAV E
MENU
SAVE
Value
000-255
000-255
Channel
1
3
Function
Master dimmer (0% - 100%)
N/A
Macro of colors
Off
Red 100%
Red 100%
Red 100%
Red 100%
Red 100%
Red
Red
Red
Red
Red
Red
Red
Red 20%
Red 40%
Red 60%
Red 80%
Red 100%
Red 100%
Red 100%
Red 100%
Red 100%
Red 100%
Red 100%
Red 100%
Red 100%
Red 20%
Red 40%
Red 60%
Red 80%
Red 20%
Red 50%
Green 20%
Green 40%
Green 60%
Green 80%
Green 100%
Green 100%
Green 100%
Green 100%
Green 100%
Green 100%
Green 100%
Green
Green
Green
Green
Green
Green
Green 25%
Green 50%
Green 75%
Green 100%
Green 100%
Green 100%
Green 100%
Green 100%
Green 100%
Green 100%
Green 100%
Green 100%
Green 100%
Green 50%
Blue
Blue
Blue
Blue
Blue
Blue
Blue 20%
Blue 40%
Blue 60%
Blue 80%
Blue 100%
Blue 100%
Blue 100%
Blue 100%
Blue 100%
Blue 100%
Blue 100%
Blue 100%
Blue 100%
Blue 100%
Blue 100%
Blue 25%
Blue 50%
Blue 75%
Blue 100%
Blue 100%
Blue 100%
Blue 100%
Blue 100%
Blue 100%
Blue 50%
000-007
008-015
016-023
024-031
032-039
040-047
048-055
056-063
064-071
072-079
080-087
088-095
096-103
104-111
112-119
120-127
128-135
136-143
144-151
152-159
160-167
168-175
176-183
184-191
192-199
200-207
208-215
216-223
224-231
232-239
240-247
248-255
2
UnRegister
ed