Unotrade GEPON OLT OT?2000S CLI, User Manual

Page: 35 / 89

GEPON OLT CLI User Manual
35
maximum Delay (us) :5788
mverage Delay (us) :4135
4.3.4.7.5. Show ONU Dynamic MAC Address List
Command
Grammar
epon(slot3 ‐ olt1 ‐ onu1)# mac ‐ address ‐ show
Function Show ONU’s dynamic learning MAC address gloably.
4.3.4.7.6. ONU Port Management Mode
Command
Grammar
epon(slot3 ‐ olt1 ‐ onu1)# port < uni ‐ port >
Function
Enter ONU port management mode and configure the ONU port’s
Parameter.
< uni ‐ port > Appoint onu port number with valid value range from fe1 to fe8.
【
Example
】
1.Enter ONU1’s port 1 interface
epon(slot3 ‐ olt1 ‐ onu1)#port fe1
epon(slot3 ‐ olt1 ‐ onu1 ‐ fe1)#
epon(slot3 ‐ olt1 ‐ onu1 ‐ fe1)#
？
input “
？
”or “help” to show the command directory
attribute ‐ onu port attribute config
bridge ‐ onu port bridge parameter config
dynamic ‐ mac ‐ clear ‐ clear dynamic mac table
dynamic ‐ mac ‐ list ‐ show all dynamic mac table
[no] enable ‐ enable onu port
info ‐ set onu port user information
qos ‐ onu port qos config
vlan ‐ onu port vlan configuration