ИНСТРУКЦИИ/USER MANUAL
UMOOV
Safety instructions
Charge only with devices rated and marked 5V to avoid damage to the speaker. Do not disassemble the speaker, this will void the warranty and may damage the
product. Rechargeable batteries have a limited number of charging cycles. Battery life and number of charge cycles vary depending on usage and settings. Never
place the speaker near high heat sources.
To keep the warranty valid, never try to repair the product yourself.
Button functions:
1. Rope
2. -: Volume down button:
previous song, turn down the volume.
3. Pause button: play,
call answer, TWS.
4. +: Volume up button: next song,
increase the volume.
5. Power button: on / off
power supply, siri, reset.
6. Mode button: switch the mode
of reproduction
7. LED indicator.
8. Micro USB port.
9. AUX IN port
10. Bluetooth indicator
11. Microphone
Charging:
Connect the supplied charging cable to the charging port and to a USB port on your computer or USB charger. The charging indicator lights up in red during
charging. The LED turns off when fully charged. It is recommended to charge 10 minutes before turning on, if you do not use for 7 days, you can continue to
use during charging.
Power on / off:
Power on: Press and hold the power button for 3 seconds to turn on the speaker, then the Bluetooth indicator lights up and you can connect Bluetooth devices.
To turn off: Press and hold the power button for 3 seconds to turn off the speaker, and then the Bluetooth indicator will turn off.
Siri functionality:
Short press of the power button to activate SIRI (IOS), supports Huawei's intelligent voice assistant
Connect the speaker:
Turn on the speaker, the Bluetooth indicator flashes in white on your Bluetooth device search device. Select the speaker from the list. It will give an indication
sound when the connection is successful.
the Bluetooth indicator is white. Only one Bluetooth device can be connected at a time.
If you want to connect another device to the speaker, turn off the current one first.
Disconnect the speaker:
When connected via Bluetooth: long press the mode key to end the connection.
Reconnect:
Some Bluetooth devices support automatic reconnection, and with these devices the speaker automatically
reconnect. The speaker will not connect automatically to devices that do not support automatic reconnection.
When not connected: long press the mode key to connect to the last switched off device.
Production mode:
Press the mode button briefly to switch between different playback modes: BT, AUX.
Audio cable connection:
Turn on the speaker. Connect a 3.5 mm audio cable to the speaker and your device. The speaker is already connected to your de vice.
The functionality of the pause button:
Short press:
1) Music playback status: playback, pause function.
2) When there is an incoming call: answer the call.
3) When you receive the call: close the phone call.
Long press:
1) When making a call: Press for 2 seconds to reject the call.
2) Press for 2 seconds to enter a TWS connection after connecting,
press for 2 seconds to disconnect the TWS connection.
Double click:
When connected via Bluetooth to your phone: to make the last call.
Sound volume:
When listening to music:
Increase the volume: Briefly press the “+” button.