16
BEFORE USING THE APPLIANCE THE FIRST TIME
1. Remove all packaging materials
and any transport safety devices.
Keep packaging materials away
from children - danger of suffo-
cation!
2. Clean all parts with a damp
cloth, as described in the chapter
“Cleaning and care”.
3. Check to make sure that the appli-
ance is stable.
4. Connect the base via the power
cord to the power supply (220–
240 V~, 50 Hz).
5. Remove the kettle from the base.
6. Press the opening button on top
of the handle. The lid is released
and can be open.
7. Add clear, cold water to the “Max”
marking.
8. Close the lid by pressing lightly.
9. Place the kettle level on the base.
10. Switch on the kettle by pressing
the ON/OFF switch downwards
into the „I“-position. The kettle
cannot be switched on if it is not
properly seated on the base.
11. When the water boils, the appli-
ance automatically shuts off.
12. For hygienic reasons, please dis-
card the water from the first boi-
ling.
OPERATION
1. Remove the kettle from the base.
2. Press the opening button on top
of the handle. The lid is released
and can be open.
3. Fill the kettle with water (mini-
mum 0.6 litres, mark MIN, maxi-
mum 1.7 litres, mark MAX).
4.
CAUTION!
If the kettle is overfilled, boiling
water may be ejected!
5. Close the lid until it clicks into
place. The locking prevents acci-
dental opening.
6. Place the kettle level on the base
in order to establish the contact
with the power connection.
7. Switch on the kettle by pressing
the ON/OFF switch downwards
into the „I“-position. The kettle
cannot be switched on if it is not
properly seated on the base.
8. Whenever you take the kettle off
the base, the appliance is auto-
matically switched off, even if the
water is not yet boiling.
9. The kettle automatically stops
heating at the latest when the
water boils.
10.
ATTENTION:
The automatic switch-off only
works, if the lid is correctly closed.
11. Of course you may also push the
switch into the „O“-position to
interrupt heating.
12.
CAUTION!
Ensure that the kettle is switched
off before removing it from the
base.
Copyright UNOLD AG | www.unold.de
