28
10. Place the motor block on the mix-
ing container. Align the motor
block and lid so that the arrow
points to the „
“ symbol. Ensure
that fastening the motor block
does not detach the bowl from the
base! To take off the motor block,
you must turn the arrow to the
„
“ symbol.
Caution: Do not place your
fingers between the motor
block and the lid – danger of
injury due to pinching!
DISASSEMBLY
1. Turn the switch into the position
„0“, and wait until the hooks have
completely stopped turning.
2. Then turn the switch for min. 5
seconds into the position
and hold the switch during this
time.
3. The hook/whisk now turns in
opposite direction in order to
release it. Please note that the
hook/whisk will only detach from
the motor block after removing
the motor block from the bowl.
4. Hold the motor block at the handle
and turn it counter-clockwise,
until it can be lifted from the
bowl (Symbol
). The hook/whisk
will remain in the batter and can
be removed.
Copyright UNOLD AG | www.unold.de
