Unnecto U152 User Manual Download Page 4

 

 

4

 

2.

 

Getting started  

2.1

 

Installing the SIM card  

Press and hold the power/end key to turn off the phone.  
Remove the battery cover and then the battery.  
Insert the SIM card into the SIM card holder. Ensure that the metal contacts 
face the phone.  
Re-install the battery. Place the battery cover onto the back of your phone and 
slide it forward until the latch catches the cover.  

 

Note: 

A SIM card can be easily damaged if its metal contacts become scratched. 

Therefore, take special care when holding or inserting it and keep it away from 
children.  

 
2.2 Charging the battery  

The battery is not fully charged when it is first unpacked. It takes three charging-
discharging cycles for the battery to reach its peak performance.   
 
Charge a battery according to the following steps:  

 

Connect the charger to the connection jack of the phone in the proper 
direction, and connect the charger to a main socket.  

 

The phone displays "Charger Connected!" and starts charging after properly 
connected. The battery icon dynamically displays the charging process. In 
switch-off state, the phone dynamically displays the charging process.  

 

When the battery is fully charged, the charging process stops automatically, 
and the battery icon indicates full grid on the screen. After the battery is fully 
charged, remove the charger from the phone and socket as soon as possible.  

 

3.

 

Basic Functions  

3.1 Power on and off 

 

To turn the phone on and off press and hold the power button at the top of the 
device. 
 

3.2 Make a call  

Enter the phone number including the area code. Press Call key to complete the call.   
 

3.3 Make an extension call  

When making an extension call, press “*” key several times to get the “P” that is a 
prefix of extension numbers. It will dial automatically after several seconds since you 
dialed the telephone number.   
 

3.4 Make an international call  

First, enter the country code, then the area code and the phone number, and press 
the call key. “+” is needed when entering a country code. The “+” icon can be entered 
by pressing the “*” key several times.   
 

 

 

Summary of Contents for U152









Reviews: