12
Receiver Programming
Set the Transmitter Level Select Switch to either position 1 or 2.
l
With the Receiver in the off position, press and hold the on/off button continu-
ously for 5 seconds, the LED stays on, even after the button is released and waits
to receive an ID for up to 12 seconds.
l
During this 12 second programming mode, press and release the Transmitter’s
Dog Select Button once. (This sends the Transmitter’s unique ID to the Receiver.)
l
When the LED light on the Receiver turns off, the new ID has been received.
(You can verify by pressing any of the Vibration Stimulation or Electrical
Stimulation Activator Buttons.)
l
If the Receiver does not receive the new ID, it will automatically exit the pro-
gramming mode and retain its previous ID.
Multi-Dog Functions
l
To select between single dog and 2nd dog, the Transmitter’s Level Select Switch
must be in the “0” position. Each press and release of the Dog Select Button
toggles back and forth between the single dog (Red LED) and the 2nd dog
(Green LED).
l
The Transmitter will remember the last dog selected.
