Uniz SLASH 2 PLUS, User Manual

Page: 34 / 37

28
D USAGE AND MAINTENANCE
SUGGESTION
Things we recommend
1. After taking off resin tank, please place it on a clean table to avoid scratch.
2. When you slice a file by UNIZ Dental software, we recommend saving the sliced file to a solid
state drive (SSD) for faster storage speed.
3. Check whether there is dross left on Build Platform or at bottom of resin tank before each
printing. If there is dross left on Build Platform, clean it with a scraper. If there is dross left in resin
tank, you could use Exposure Cleaning function to cure and clean.
4. Well mix the resin in resin tank by stirring with a hard cardboard like business card before each
printing.
5. Place the printer on a smooth desk, adjust 4 leveling screws to keep the printer stable to avoid
disturbing while printing.
6. Keep the Cover in position while printing.
7. Check and clean the Build Platform and Resin Tank after each print.
8. Clean resin dropped incidentally on LCD screen, cover immediately.
9. Drill a hole at the side of the bottom of a model if it is a closed hollowed model.
10. Keep the printer and resin tank in a ventilated place, avoiding straight sunlight.
11. Use 80~200 mesh filter to filter the resin when put it back to bottle for storage.
12. Do NOT move printer when there is resin left in resin tank to avoid spilling.
13. Do Not let child close or operate the printer to avoid harm to child or damage to printer.
14. Do NOT gaze LCD screen when doing test print without Resin Tank and Build Platform.
15. Do NOT leave resin in resin tank for more than 24 hours if not print.