Unix CCTV PT 980, User Manual

Page: 17 / 23

4
5
3 8
FUNCTION SETUP
- - - - - - - - - - - - - - - - - - - - - - - - - - -
< PRESET SETUP >
< SCAN SETUP >
< PATTERN SETUP >
< GROUP SETUP >
< SCHEDULE SETUP >
BACK
EXIT
GROUP SETUP SCREEN 2
The group function allows running sequence of presets, pattern
and/or scans. Max. 8 group can be stored. Each group can have
max. 20 action entities which can be preset, pattern or scan.
EDIT GROUP - Initial Screen
3
To edit group, press near key to move screen 4.
At the current screen, if moves joystick Down, the cursor will move
to ‘SAVE’ menu.
EDIT GROUP – Select Function Sequence 4
Note that max. 20 functions are allowed in a group.
Move cursor Up/Down to rotate among 20 functions.
EDIT GROUP - Assign Function 5
Move cursor to the ‘NO.’ to assign the function, press near key to
set up. Select the function by moving joystick Up/Down.
EDIT GROUP - Assign Function 6
Move cursor Left/Right to select items and move cursor Up/Down
to change each value.
EDIT GROUP - Select Function Sequence 7
The function undefined cannot be set as action.
e.g.) If ‘PATTERN 1’ is not defined at ‘ROOT MENU>FUNCTION
SETUP>PATTERN SETUP’, then the ‘ACTION 1’ will be
automatically changed to ‘NONE’.
EDIT GROUP- Saves the Setting 8
After finishing setting up all actions, place cursor on ‘SAVE’ . Then,
press near key to save data.
GROUP SETUP
- - - - - - - - - - - - - - - - - - - - - - - - - - -
GROUP NO.
CLEAR GROUP
< EDIT GROUP >
BACK
EXIT
1
UNDEFINED
CANCEL
EDIT GROUP 1
- - - - - - - - - - - - - - - - - - - - - - - - - - -
NO. ACTION NO. DWELL OPT
- - - - - - - - - - - - - - - - - - - - - - - - - -
1
NONE
2 NONE
3 NONE
4 NONE
5 NONE
- - - - - - - - - - - - - - - - - - - - - - - - - -
SAVE
CANCEL [NEAR:EDIT]
EDIT GROUP 1
- - - - - - - - - - - - - - - - - - - - - - - - - - -
NO. ACTION NO. DWELL OPT
- - - - - - - - - - - - - - - - - - - - - - - - - -
1 NONE
2 NONE
3 NONE
4 NONE
5
NONE
- - - - - - - - - - - - - - - - - - - - - - - - - -
SAVE
CANCEL
[NEAR:EDIT ACT]
[FAR :EDIT END]
Press Near Key
Select <EDIT GROUP>,
Press Near/Enter Key
>
>
>
>
>
>
>
GROUP NO.
Selects group number to edit. If a selected group number is not defined,
‘UNDEFINED’ will be displayed under the selected group number.
1 ~ 8
NO.
Means the sequence of the function in a group.
The functions will be run from lower no. to higher no. by sequence.
1 ~ 20
<EDIT GROUP>
Moves to edit the group assigned.
CLEAR GROUP
Deletes data in the current group.
CANCEL / OK
ACTION NO.
Select the function.
Select the function no. separately.
Sets dwell time between function by moving joystick Up/Down. If the
‘OPT’ of pattern/group is set to repeat more than twice, it means the repeat
interval.
NONE / PRESET 1~128(Excluding 95) /
PATTERN 1~4 / SCAN 1~4
DWELL TIME
It should be preset speed when preset is set in ‘ACTION’. It should be the
number of repeat when pattern or scan is selected in ‘ACTION’.
OPT
00:03 ~ 04:00 (min:sec)
PRESET: 2~360 / PATTERN & SCAN: 1~255
1
2
6
7
[ :MOVE CURSOR]
[ : CHANGE VAL.]
EDIT GROUP 1
- - - - - - - - - - - - - - - - - - - - - - - - - - -
NO. ACTION NO. DWELL OPT
- - - - - - - - - - - - - - - - - - - - - - - - - -
1 PATTERN 1 00:0 3 1
2 NONE
3 NONE
4
NONE
5
NONE
- - - - - - - - - - - - - - - - - - - - - - - - - -
SAVE
CANCEL
EDIT GROUP 1
- - - - - - - - - - - - - - - - - - - - - - - - - - -
NO. ACTION NO. DWELL OPT
- - - - - - - - - - - - - - - - - - - - - - - - - -
1 PATTERN 1 00:0 3 1
2 NONE
3 NONE
4 NONE
5
NONE
- - - - - - - - - - - - - - - - - - - - - - - - - -
SAVE
CANCEL
[ :MOVE CURSOR]
[ : CHANGE VAL.]
EDIT GROUP 1
- - - - - - - - - - - - - - - - - - - - - - - - - - -
NO. ACTION NO. DWELL OPT
- - - - - - - - - - - - - - - - - - - - - - - - - -
1 NONE
2 NONE
3 NONE
4 NONE
5
NONE
- - - - - - - - - - - - - - - - - - - - - - - - - -
SAVE
CANCEL
Preset
1
Preset
120
Pattern5
1 Times
Pattern5
n Times
Dwell Time
Max. 20 Entities
Scan3
1
[NEAR:EDIT ACT]
[FAR :EDIT END]
EDIT GROUP 1
- - - - - - - - - - - - - - - - - - - - - - - - - - -
NO. ACTION NO. DWELL OPT
- - - - - - - - - - - - - - - - - - - - - - - - - -
1
PATTERN
1
00:0
3 1
2 NONE
3 NONE
4 NONE
5 NONE
- - - - - - - - - - - - - - - - - - - - - - - - - -
SAVE
CANCEL
EDIT GROUP 1
- - - - - - - - - - - - - - - - - - - - - - - - - - -
NO. ACTION NO. DWELL OPT
- - - - - - - - - - - - - - - - - - - - - - - - - -
1
PATTERN
1
00:0
3 1
2 NONE
EDIT GROUP 1
- - - - - - - - - - - - - - - - - - - - - - - - - - -
NO. ACTION NO. DWELL OPT
- - - - - - - - - - - - - - - - - - - - - - - - - -
1 NONE
2 NONE
<In case that ‘PATTERN 1’ is not defined.>
Press
Near/Enter
Key
Press
Near/Enter
Key
Press
Far Key
Press
Near/Enter
Key
Press
Near/Enter
Key
OSD - FUNCTION SETUP>GROUP SETUP
33
OSD - FUNCTION SETUP>GROUP SETUP
3
32