Uniwide UniServer 1522LV User Manual Download Page 27

Page: 27 / 68

4. BIOS and Jumper Setting

4.1 BIOS

This chapter provides information on the BIOS Setup program and allows you to configure the system for

optimum use. You may need to run the Setup program when:

An error message appears on the screen during the system booting up, and requests you to run SETUP.

You want to change the default settings for customized features.

4.1.1 Entering Setup

Power on the computer and the system will start POST (Power On Self Test) process. When the message below

appears on the screen, press <F2> key to enter Setup.

Press F2 to enter SETUP

If the message disappears before you respond and you still wish to enter Setup, restart the system by turning it

OFF and On or pressing the RESET button. You may also restart the system by simultaneously pressing <Ctrl>,

<Alt>, and <Delete> keys.

NOTICE

The items under each BIOS category described in this chapter are under continuous update for better system
performance. Therefore, the description may be slightly different from the latest BIOS and should be held for
reference only.

Summary of Contents for UniServer 1522LV





































































Search results

Summary of Contents for UniServer 1522LV

Reviews:

Related manuals for UniServer 1522LV

Brands by name

Popular brands

Uniwide UniServer 1522LV, User Manual

Search results

Summary of Contents for UniServer 1522LV

Reviews:

Related manuals for UniServer 1522LV

Brands by name

Popular brands