IMPORTANT SAFETY INSTRUCTIONS
•
No naked flame sources such as lighted candles should be placed on the AC adaptor and main unit.
•
Do not use the unit immediately after transportation from a cold place to a warm place, condensation problem may result.
•
The ventilation should not be impeded by covering the ventilation openings with items such as newspapers, table-cloths,
curtains, etc.
•
No naked flame sources, such as lighted candles, should be placed on the apparatus.
•
The use of apparatus in moderate climates.
•
The apparatus should not be exposed to dripping or splashing.
•
Ensure a minimum distance of 5cm around the apparatus for sufficient ventilation.
•
Do not place objects filled with liquids, such as vases, on the apparatus.
•
The marking plate is located on the back of unit.
•
Attention should be drawn to the environmental aspects of battery disposal.
•
Do not throw batteries in fire!
•
Battery shall not be exposed to excessive heat such as sunshine, fire or the like.
•
Excessive sound pressure from earphones and headphones can cause hearing loss.
•
Under the influence of electrical fast transient or/and electrostatic phenomenon, the product may malfunction and require
user to power reset.
WARNING:
•
AC adaptor is used as the disconnect device. It shall remain readily operable and should not be obstructed during
intended use. To be completely disconnected the apparatus from supply mains, the AC adaptor of the apparatus shall be
disconnected from the mains socket outlet completely.
•
Never use an AC adaptor that is damaged, route power lead in a safe manner and make sure it is not subjected to trapping
or pinching. If the power lead is damaged refer to a qualified service agent
UNPACKING YOUR UNIT
When you unpack your new radio, be sure you have removed all the accessories and information papers. The items below
should have been packed in the box with your radio.
•
Digital Radio
•
AC/DC adaptor
•
External antenna
•
CR2025 battery
•
Instruction manual
Battery back-up system
This radio is equipped with a memory holding system that is powered by 1x CR2025 battery. Normal operation will resume
after power is restored, so you will not have to reset the language, time zone, time and date.
Installing battery
1.Remove the door of battery compartment to access to back-up battery lid. Eventually remove power batteries if installed.
2.Turn the lid to the left to unlock and remove it.
3. Insert 1x CR2025 battery with the “+ “ sign facing up.
4. Replace the lid and turn it to the right to lock it.
GB - 1
Congratulations on your purchase. Thank you for your confidence in Uniwave products.
Please read fully this user manual before operating the unit and keep it for future use.
Disconnect via PC menu
You can also manage the disconnection via PC menu.
1. Click on the ‘safely remove’ icon in the PC system tray.
Click on the ‘safely remove’ message.
3) Media
3.1) Slide pace
Select this option and press
LEFT
or
RIGHT
button to select the desired slide-
show interval time for picture playback : 1 second, 2 seconds and 5 seconds.
3.2) Slide mode
Select this option and press
LEF
T or
RIGHT
button to select the slide-show
mode between “ Normal”, “ Random” and “ Loop”.
“Normal “ : Play all pictures once and stop.
“Random”: Play pictures in a random order repeatedly.
“Loop “ : Play all pictures repeatedly.
3.3) USB Connection
You can transfer files from your PC to the SD/ MMC card via the USB socket on
right side of the unit.
1. Select the option and press
OK
button when the unit is connected to the PC via
USB cable (not supplied). The unit will
be recognized as a mass storage device (removable disk) on your computer.
2. Message on right side is displayed.
3. When file transfer is completed, press
OK
button on unit to call the ‘safely
remove’ function automatically.
4. After that, disconnect the USB cable.
Tip
: When connected, you can use PROGRAMGUIDE software (downloaded from
website http://www.uniwave.fr/) to edit your radio guide. Download the radio guide
list from your unit to PC, edit it in your PC and load the modified list back to your
set.
A message will pop up, telling you that it is now safe to disconnect the device.
You can now safely unplug the USB cable from your receiver and/or computer.
Note:
PC OS version supported :Windows® Me, 2000, XP and Vista
4) System version
Select this option and press
OK
button to check the software version of your unit.
GB - 12
MAINTENANCE
Cleaning
Be sure to turn the unit off and disconnect the AC adaptor before maintaining the unit.
- Use a soft, dry, clean cloth. Regularly dust the vents at the back or sides.
- Using solvents, abrasive or alcohol-based products risks damaging the appliance.
- If an object or liquid enters inside the appliance, unplug it immediately and have it checked by an authorized engineer.
DRM-2472 IB UNIW 001 REV0 - GB.p65
2009-3-19, 18:53
3
