4
IMPORTANT: the first time that the coffee maker is used, all the accessories and the internal
circuits should be washed with hot water. Then make a few batches of coffee to throw away.
CLEANING AND MAINTENCE
. Before performing the cleaning operations, wait for the coffee maker to have cooled down after use.
. Thoroughly rinse the interior of the boiler with warm or cool water.
. Dry the appliance with a dry cloth after cleaning.
. Regularly check the funnel and the gasket. Replace if there are signs of wear or deterioration. Use original
spare parts only.
. After brew the coffee, clean the disk filter 1 with the sponge every time.
(Fig. 10)
. Every so often check that the holes in the disk filter 2 is not blocked; if necessary, clean using a pin.
(Fig.
11)
. Clean the inside of the tube and poke the hole with a pin once a week. (Fig. 12)
. Do not wash the coffee maker in the dishwasher.
(Fig. 13)
.When cleaning do not use solvents or abrasive detergents. Simply clean it with a sponge, keeping attention
not to wet the electrical parts.
.Never rinse the boiler under the tap water and never immerse it in water. (Fig. 14)
TROUBLESHOOTING
PROBLEM
CAUSE
SOLUTION
No coffee is released
No water in the boiler
Fill the boiler with fresh water
The coffee takes a long time
be released
The coffee used is not the
right type
The disk filter is blocked
Use ground coffee expressly for Moka coffee makers
Clean the disk filter as described in the paragraph “Cleaning
and maintenance”
Clean the disk filter as described in the paragraph
