Univox 230450, User Manual

Page: 6 / 16

6
Use Listener as a loop
receiver
Turn on Listener with the on/off switch. When Listener
is on, the red LED on the front is flashing. The sound can
either be heard through the built-in speaker or using
separate headphones or an earphone with 3.5 mm
stereo plug which is connected to the outlet at the
bottom.
Put the neck strap around your neck and make sure
Listener is hanging vertically all the time. Adjust the
volume with the volume control wheel on the right side
and the treble/bass with the tone control wheel on the
left side. Hanging around the neck on a person of normal
height, Listener will be approximately 120 cm above
the floor, i.e. at the same height as the hearing aid on a
seated person, making it easy to walk around the looped
area and listen to the sound of the loop.