MV950K KEYBOARD
Revision 1.01
Operation Manual
October 1996
Copyright
UniVision Engineering Ltd.
All Rights Reserved.
3
2. KEYBOARD PARAMETERS
2.1. Keyboard Number
The keyboard number is determined by the physical connection to
the MV300 switcher.
To observe the present keyboard number, hold down the SHOW
key until the letter
‘
n
’
appears on the monitor number display. The
keyboard number (1 to 4) will alternately be shown on the camera
number display.
To return to normal operation, depress the SHOW key.
2.2. Beeper Enable/Disable
It is possible to enable or disable the beeper by holding down the
SET key until the letter
‘
p
'
appears on the monitor number display.
This is then followed by either depressing the ON key to enable the
beeper or depressing the OFF key to disable the beeper.
To return to normal operation, depress the SET key again.
2.3. Communication Speed with MV300
The keyboard can communicate with the MV300 switcher at 4
different speeds (ie. 19200, 9600, 4800, and 2400bps).
To see the current speed, hold down the SET key until the letter
‘p’
appears on the monitor number display. This is followed by
depressing the RUN key until the letter
‘b’
appears on the monitor
number display. The baud rate (in abbreviatec form) will then be
displayed on the camera number display (Please refer to Table 1).
The speed of the MV300 switcher can be decreased or increased by
depressing the keys ON and OFF respectively. The communication
speed should be set to match that of the MV300.
To return to nuomal operation, depress the SET key again.
Table 1
Abbreviation of Speed
Speed (bps)
Abbreviation
19,200
9,600
4,800
2,400
192
96
48
24
Summary of Contents for MV950K
Page 3: ......
