9
3.2 -
PACKAGE CHECK UPON RECEIPT
Upon receipt of the package containing the Vegetable cutter, check accurately that the package has not been damaged
during transport.
If the package shows signs of damage caused during transport, the carrier must be informed immediately; moreover a
detailed report on the extent of the damage caused to the machine must be notified to the carrier within three days from
the delivery date on the shipping documents.
DO NOT OVERTURN THE PACKAGE!!
When the package is transported,
make sure the box is lifted by the 4 corners (parallel to the ground).
3.3 -
PACKAGING DISPOSAL
The components of the packaging (cardboard, pallet, plastic straps and polyurethane foam) are urban solid waste; there-
fore they can be easily disposed of.
If the machine has to be installed in countries where specific regulations are in force, packaging must be disposed of in
compliance with such regulations.
CHAP.4 -
INSTALLATION
4.1 -
SETTING UP OF THE MACHINE
The vegetable cutter must be installed on a suitable and adequate size work table refer to
Fig.n°1
2
, (and therefore suffi-
ciently large); the machine must be solid, stable and fixed at a height of 80 cm from the ground. Moreover the machine
must be installed in a room with max. 75% non saline humidity at a temperature b5°C e +35°C; in a location
and environment that does not provoke malfunctions or faults in the machine.
4.1.1 -
COLLECTING BOWL
If the Vegetable cutter is provided with a collecting bowl, place it under the mouth of the machine, so as to cover the pro-
duct exit
(Fig. n°1
4
).
4.2 -
ELECTRICAL CONNECTION
4.2.1
- VEGETABLE CUTTER T.M. (
115
Volt,
60 Hz)
The Vegetable cutter is equipped with a power supply cable with a SJT 16 AWG mm
2
section; length 1,5 m and a
NEMA
5 plug
.
Connect the Vegetable cutter to 115 Volt
60 Hz,
by interposing a differential thermomagnetic switch 10 A
'
I = 0
,03
A.
Check correct machine earthing.
Moreover check that the specifications on the rating plate-serial number
(Fig. n°1
5
)
correspond to the specifications pro-
vided in the consignment and delivery note.
Fig. n°1
4
- Collecting bowl
Fig. n°1
5
- Rating plate - serial number
