USING THE PIZZA SPINNER
After you turn on the main power switch (posted on right side) , you will see the frontal LCD
display on. The upper line shows the Program Number (from 1 to 19) . The lower line shows
“
P
ressure” and “
T
ime” set for that program. Use buttons “+” or “-“ to move through the
programs. Anytime you change program number, you will see below “P” and “T” set for it.
Setting programs:
Press “+” or “-“ to choose the program number you would like to set. Pressing “SET”
button, you will see the program number blinking. Now press “OK” button and the cursor
goes blinking on “P”. Using “+” and “-“ to choose the final thickness : from 10 (thicker) to
0.5 (thinner) . Then press “OK” to pass setting “T” (spinning time). Use “+” and “-“ to set
wheels spinning time in seconds (from 1 to 10 ).
Suggestion:
There is always a relationship between “P” and “T”. Much high is the dough weight, much
high must be “P” and much low must be “T”. For example : with dough ball weight around
23 Oz or more, “P” should not be less then 3 or 4 and “T” not more then 2 . As well with
dough ball weight around 7 Oz or less , “P” should not more then 1.5 and “T” not less then
4 seconds. These are just general suggestions to explain how weight, “P” and “T” are
involved in final shape and diameter.
ATTENTION: The lower round plate must be closed for the Pizza-Spinner to work.
Otherwise the machine will not run.
PAGE 7
