background image

INSTALLATION REQUIREMENTS

IMPORTANT…Please read carefully

12

Electrical Requirements

The refrigerator should always be plugged into its own individual
electrical outlet—
Please refer to the rating plate on the refrigerator
for the correct voltage and frequency. This is recommended for best
performance and to prevent overloading house wiring circuits, which
could cause a fire hazard from overheated wires.

WARNING: HOW TO AVOID ACCIDENTS TO CHILDREN.
WHEN DISCARDING AN OLD REFRIGERATOR OR
FREEZER BE CERTAIN TO MAKE THE LOCK UNUSABLE.
IF POSSIBLE, REMOVE THE DOORS AND DISCARD
SEPARATELY. DO NOT ATTEMPT TO STAND ON TOP OF
YOUR APPLIANCE. IT IS NOT DESIGNED FOR SUCH USE
AND YOU COULD INJURE YOURSELF OR DAMAGE THE
APPLIANCE BY SUCH ABUSE. CHILDREN SHOULD NOT
BE ALLOWED TO PLAY WITH THE APPLIANCE OR
TAMPER WITH THE CONTROLS.

How to Connect Electricity

For personal safety, this appliance must 
be properly earthed.

The power cord of this appliance is 
equipped with an earthing plug
which mates with a standard
grounding wall outlet to minimize
the possibility of electric shock
hazard from appliance.

Have the wall outlet checked by a
qualified electrician to make sure
the outlet is properly earthed.

Where an unearthed wall outlet is encountered, it is your personal
responsibility and obligation to have it replaced with a properly
earthed wall outlet.

If the power supply cord becomes damaged, it must be replaced by 
a qualified service agent in order to avoid a safety hazard.

If the plug does not fit your outlet a new plug can be fitted.
IMPORTANT: In some countries the refitting of electric plugs 
and cables is only permitted when the work is completed by a
qualified technician.

Insure proper
earthing exists
before using.

Earthing Plug

PREPARATION

(continued)

19 mm or Raised Panel

A raised panel design screwed or glued to a 6 mm thick backing, or a
19 mm routed board can be used. The raised portion of the panel must
be fabricated to permit clearances of at least 51 mm from the handle
side for fingertip clearance and 32 mm from the hinge side to avoid
striking adjacent cabinetry.

6 mm 
Thick Backing

Refrigerator
Door

19 mm

32 mm
Clearance
Hinge Side

Appearance
Panel

51 mm
Clearance
Handle Side

Weight limitations for custom panels:
Fresh Food : 17 kg max.
Freezer Door : 9 kg max.

Summary of Contents for Refrigerator - Freezer



















Reviews: