Page 19
AUX Function: Programming
a 7th Component
After you’ve finished programming the WR7 for six primary com-
ponents and you did not use AUX, you can take advantage of the
AUX function to program a 7th component, such as a second TV,
DVD, or any other audio/video component that you may have in
your system. Simply program the [AUX] button in the same manner
as any other component using either the Quick Set-Up Method,
the 3-Digit Code Entry Method, the Auto-Search Method or the
Learning Method.
Finding a Component’s Set-up
Code Number
If you used the Auto--Search or Learning Methods to program a
component, you may not know the code number you programmed.
Here is a way for you to identify what that code number is, so you
can make a note in the back of this Manual for future reference.
STEP 1:
Press the component button you would like to verify and
the SELECT [SEL] button at the same time for two seconds until the
selected component LED light turns on.
IMPORTANT:
You have 30 seconds to perform the next step
while you are in programming mode. If you do not press a button
within 30 seconds, the component LED light will turn off.
The remote will exit the programming mode and you will have
to start over.
COMPONENT
BUTTONS
SELECT
INFO
WR7 1/13/08 12:18 PM Page 19
