Universal 79105 Owner'S Manual Download Page 16 | Manualshive

Page: 16 / 20

background image

16

Please contact Universal

®

Gym Equipment/FFA Corp. for missing or defective parts at one of the following:

Phone 1-800-

472-9856 or Fax 1-662-495-5038 or E-mail at [email protected].

Mailing address: Universal

®

Gym Equipment/FFA Corp. - 100 Tubb Ave. West Point, MS 39773.

Website www.universalgymequipment.com

17

Please contact Universal

®

Gym Equipment/FFA Corp. for missing or defective parts at one of the following:

Phone 1-800-

472-9856 or Fax 1-662-495-5038 or E-mail at [email protected].

Mailing address: Universal

®

Gym Equipment/FFA Corp. - 100 Tubb Ave. West Point, MS 39773.

Website www.universalgymequipment.com

FIGURE 6

Step 40.

Step 41.

Step 42.

Push BINDING OF WEIGHT SHROUD (35) completely onto edges of WEIGHT SHROUDS (17).

Attach WEIGHT SHROUDS (17) to WEIGHT TOP FRAME (6) and WEIGHT BASE (3) with 5/16” x 1/2” HEX HEAD

BOLTS (44) and 5/16” WASHERS (48).

Over time the cables will need to be adjusted to remove excess slack. This can be done by adjusting the adjust-

ment bolts on one or both cables if needed. Thread the adjustment bolt into the SELECTION ROD (12) or SINGLE

PULLEY BRACKET (9) until the slack has been removed and then tighten locking nut against SELECTION ROD

or SINGLE PULLEY BRACKET.

«
...
14
15
16
17
18
...
»

Summary of Contents for 79105





















Reviews:

No comments

Related manuals for 79105

The BOWFLEX Xtreme2

Brand: Bowflex Pages: 72

Brand: Impex Pages: 19

Brand: Impex Pages: 12

Brand: Impex Pages: 10

Marcy Platinum MP-4500

Brand: Impex Pages: 37

Iron Grip Sport IGS-01

Brand: Impex Pages: 8

COMPETITOR CB-359

Brand: Impex Pages: 11

Brand: Impex Pages: 9

Brand: York Fitness Pages: 24

Brand: Deltech Fitness Pages: 10

Ultra Trainer TF-UT-2

Brand: Taurus Pages: 49

Brand: ParaBody Pages: 3

Brand: ParaBody Pages: 3

Brand: Impex Pages: 9

Perform Multigym

Brand: York Fitness Pages: 36

Club 190 W Bench

Brand: Weider Pages: 12

Club 290 W Bench

Brand: Weider Pages: 20

Brand: Weider Pages: 28

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands