UT9925
AIR HAMMER
UT9925
AIR HAMMER
Replacement Parts
Parts Breakdown for UT9925
Tool Operation and Maintenance
•Daily, before putting tool into operation,
disconnect air hose and pour 1/4 oz. of
air tool oil into the air inlet.
•Blow out air line to clear it of accumu-
lated dirt and moisture. Connect tool and
operate momentarily to allow oil to be
carried through tool.
•Hose runs longer than 8 feet should be
connected to a 1/2” ID hose to provide
sufficient volume for proper performance.
•We recommend oil made exclusively for
air tools or equivalents which include
moisture absorbants, rust inhibitors,
metal wetting agents and an EP (extreme
pressure) additive.
Limited Warranty
Universal Tool warrants its tools to be free from defects in material and workmanship
for one year from the date of purchase. This warranty does not apply to tools which
have been abused, misused, modified or repaired by someone other than Universal
Tool or its authorized service centers. If a Universal Tool proves defective in material of
workmanship within one year after purchase, return it to any authorized service center
or to Universal Tool, freight prepaid. Please enclose your name, address and adequate
proof of purchase date with a brief description of the defect. Universal Tool will, at its
option, repair or replace defective tools, free of charge. Repairs or replacements are
warranted as described above for the remainder of the warranty period. Universal
Tool's sole liability and your exclusive remedy under this warranty is limited to repair or
replacement of the defective tool. There are no other warranties expressed or implied
and Universal Tool shall not be liable for incidental, consequential or special damages, or
any other damages, costs or expense of repair or replacement as described above.
Speed................................................................................................................... 3,700 BPM
Chisel size........................................................................................................ .401" Shank
Stroke length.....................................................................................................................2-1/2”
Length............................................................................................................................... 6.0"
Weight............................................................................................................................ 2.5 lbs.
Average air consumption........................................................................................... 4 CFM
Air inlet .................................................................................................................. 1/4" NPT
Recommended hose size.................................................................................. 3/8" I.D.
Maximum operating pressure.............................................................................. 90 psi
REF# PART#
DESCRIPTION
Q’TY
1
9RL502012BFV1 HOUSING
1
2
9RL50202
SET SCREW
1
3
9RL80513
ROLL PIN(3x22mm)
2
4
9RL20103
INLET BUSHING
1
5
9RL20104
CAP
1
6
9RL20105
O-RING(4.9x2.2mm)
2
7
9RL20106
REGULATOR
1
8
9RL20107
O-RING(11x2.4mm)
1
9
9RL20108
VALVE STEM
1
10
9RL20109
O-RING(3.8x1.9mm)
1
11
9RL80504
O-RING(3.5x1.5mm)
1
12
9RL20111
VALVE BUSHING
1
13
9RL80510
O-RING(12x2mm)
1
14
9RL20113
SPRING
1
15
9RL20114
TRIGGER BUTTON
1
16
9RL50216
CUSHION SPRING
1
17
9RL50217
O-RING(42x2mm)
4
18
9RL50218
CYLINDER SLEEVE
1
19
9RL20115K1
VALVE BLOCK ASSY
1
20
9RL50124
SPACER WASHER
1
21
9RL50120
PISTON FOR MEDIUM AIR HAMMER
1
22
9RL50121
CYLINDER FOR MEDIUM AIR HAMMER
1
23
9RL502233
CLAMPING COVER BLACK
1
25
9RL201221
BEE HIVE SPRING RETAINER
1
28
9RL50123CU
COMFORT GRIP (BLACK)
1
