FLORIDA-PNEUMATIC.COM
Please contact 1-800-356-3392 for further assistance.
Operation
1
Operating the rivet shaver
□
This Rivet Shaver is designed to operate on 90 PSIG.
Lower pressure (below 90 PSIG) will reduce performance
of the tool. Higher air pressure (over 90 PSIG) raises the
performance of the tool beyond its rated capacity and
could cause serious damage to tool and user.
2
Inserting foot piece
□
Use the spanner wrench to loosen or tighten the foot piece.
3
Installing cutter
WARNING:
Disconnect tool from air supply before servicing
or changing accessories.
□
Press the lock button to tighten the rivet shaver cutter onto
the drive shaft. Use the spanner wrench to fasten the nose
piece.
4
Adjusting depth of cutter
□
Use 2mm hex key to loosen the screw and pull back lock
ring assembly.
□
Rotate the nose piece to adjust the depth of cutter.
