Parts Breakdown for UT7560C-1
Replacement Parts for UT7560C-1
UT7560C-1
UT7560C-1
1” PISTOL IMPACT WRENCH
USE ONLY IMPACT SOCKETS & ACCESSORIES
Sockets and accessories used shall be of the impact socket type. Always check sockets,
retainers and drives regularly for wear or damage and replace whenever necessary
Limited Warranty
Universal Tool warrants its tools to be free from defects in material and workmanship for one year from the date of
purchase. This warranty does not apply to tools which have been abused, misused, modified or repaired by
someone other than Universal Tool or its authorized service centers. If a Universal Tool proves defective in
material of workmanship within one year after purchase, return it to any authorized service center or to Universal
Tool, freight prepaid. Please enclose your name, address and adequate proof of purchase date with a brief
description of the defect. Universal Tool will, at its option, repair or replace defective tools, free of charge. Repairs
or replacements are warranted as described above for the remainder of the warranty period. Universal Tool's sole
liability and your exclusive remedy under this warranty is limited to repair or replacement of the defective tool.
There are no other warranties expressed or implied and Universal Tool shall not be liable for incidental, consequential
or special damages, or any other damages, costs or expense of repair or replacement as described above.
1” PISTOL IMPACT WRENCH
Specifications
:
Shank .....................................................................................................................................1"
Speed........................................................................................................................5,700 RPM
Working Torque..................................................................................................232-800 ft. lbs.
Max. Torque ............................................................................................................1025 ft. lbs.
Weight...........................................................................................................................11.7 lbs.
Overall length...................................................................................................................7.6 in.
Average air consumption..............................................................................................9.0 CFM
Recommended hose size...............................................................................................1/2" I.D.
Air inlet.........................................................................................................................3/8" NPT
Maximum operating pressure ...........................................................................................90 psi
ITEM #
PART
DESC
1
CA-129647
COUPLING
2.1
CA-144724
TIMING SHAFT
3
C-011086
BALL
4
P-001915
TIMING SHAFT PIN
5
CA-129645
CLUTCH DOG
6
CA-129644
RELEASE SPRING
7.2
CA-144726
1" SQ. STD. ANVIL
8
C-129643
CLUTCH HOUSING BUSHING
9
C-130933
CLUTCH HOUSING GASKET
10
C-130973
CLUTCH HOUSING (INCL. # 8, 13)
11
NL6
1/4 NORD LOCK WASHER
12
C-127944
SCREW
13
CA-129676
OIL SEAL
14
C-127944
SCREW
15
NL6
1/4 NORD LOCK WASHER
16
C-130979
HOUSING COVER
17
C-130911
HOUSING COVER GASKET
18
C-068659
BALL BEARING
19
C-129651
UPPER END PLATE
20
C-129649
CYLINDER LINER
21
C-129653
ROTOR BLADES
22
CA-129648
ROTOR
23
C-130906
END PLATE
24
C-105683
LINER DOWEL PIN
25
C-063836
BALL BEARING
26
C-130907
MOTOR HOUSING ASSM (INCL. # 27, 34)
27
C-130908
REVERSE VALVE BUSHING
28
P-092537
O RING
29
C-130913
REVERSE VALVE
30
C-087934
TRIGGER
31
C-132130
VALVE RETAINING PIN
32
P-043882
TRIGGER PIN
33
C-130921
EXHAUST DIFFUSER
34
C-130909
THROTTLE VALVE BUSHING
35
P-083071
O RING
36
CA-129659
RETAINER
37
C-130915
THROTTLE VALVE
38
CA-129677
SPRING
39
CA-129654
BUSHING ASSY. (INCL. #40)
40
C-036000
AIR STRAINER
NL
C-134460
PIN
NL
CA-099902
STOP PIN SPRING
