Universal Space Family Bowl, Operation Manuals

Page: 31 / 36

Operation Manual
If two sensor are at normal. Check the motor. For step:
1. Push the Service switch ON.
2. Screen displays main menu.
3. Press left or right button to choose the options. Press the select button to enter the option.
4. Press left or right button to choose the MOTOR TEST option, after press the SELECT button,
the ball Assy will play a motion. If the motor can’t run, please replace the motor or driver
board.
5. Push the Service Button OFF after testing.
Situation 5: There is something wrong in connection of the machine. Screen displays
“Communication Error”
1. Something wrong of wiring. Replace the wire.
2. SCM can’t work. Maintenance it.
3. PC pot was impropriated. Maintenance it.
Situation 6: Screen displays “Out of ticket! Please call attendant”.
1. Out of ticket. Replace the tickets in the ticket box and press the Ticket Reset button.
2. Ticket Assy was broken. Replace the ticket Assy.
3. The connection of ticket Assy was wrong. Maintenance it.
Situation 7: Screen displays” Load XXX Error program stop!”.
There is something wrong of the system. Reboot it with the system’ CD.
Warn: The CD named “Family Bowl 2 Restore CD Ver x.xZ” just
for repairing the fault software. Use in other occasion may cause
unforeseen accidents.
Software bug reset steps:
1. Switch on the game, then put a CD named “Family Bowl 2 Restore CD Ver x.xZ” into
CD-ROM.
2. Shut down the game, and wait 1minute then turn on the game. After a few seconds, the
screen will display the pictures and schedule.
3. Wait until the screen display a window and say “reboot”, then take the CD out. And then turn
off the game. Wait 1minute and then start the game again.
4. Then start the game will display another window. You only need to turn off the game and wait
1minute, then start the game again. Then the game will turn normally.
- 31 -