background image

MODEL MP316S

Table of Contents:

 

Page #

Smoke Alarm Limitations and Functions ................................. 2
Recommended Location of Alarms.......................................... 3
Avoid These Locations ............................................................ 4
Early Warning .......................................................................... 4
How to Install ........................................................................... 4
Locking/Tamper Feature .......................................................... 4
Operation, Testing & Maintenance .......................................... 5
QUICK FIND

®

 Alarm Originating Feature & Reset................... 5

Silence Feature ....................................................................... 6
Cautions/Warnings .................................................................. 6
Battery and Alarm Deactivation ............................................... 6
Develop and Practice a Plan of Escape .................................. 7
Quick Reference Guide / Operational Summary ..................... 8
Warranty ..................................................................Back Cover

READ ALL INSTRUCTIONS

THANK YOU for purchasing this smoke and fire alarm. This tamper-

proof alarm does not require battery changes. It has a permanent power 

sealed battery which will last for approximately 10 years. This manual 

includes important information regarding where to install the alarm, how 

to operate, maintenance, testing and product features. It also includes 

tips and information which could help protect you and your family.

Conforms to

UL Std. 217

Single Station Smoke Alarm

PHOTOELECTRIC SENSING TECHNOLOGY

SMOKE & FIRE ALARM WITH

10 YEAR PERMANENT POWER SEALED BATTERY

READ ALL INSTRUCTIONS

Summary of Contents for MP316S











Reviews: