Universal Remote Control Easy Clicker UR3-SR3, Operating Manual, Page: 7 / 24

[OK/SEL] button simultaneously for three
seconds. The corresponding device LED
will turn on indicating that it is ready to be
programmed. The LED will remain on for
20 seconds. The next step must be
entered while the LED is on.
STEP3
Point the remote control toward the
equipment and enter the three-digit code
number assigned to your brand from the
code tables. If there are more than one
three-digit number listed for your brand,
try one code number at a time until your
equipment turns off.
*Note : You can verify that you have selected the
correct code by pressing the [MUTE]
button. The equipment should turn on or
off.
STEP4
Store the three-digit code by pressing the
same [DEVICE] button once again. The
device LED will blink twice to confirm that
the code has been stored.
*Note : Try all the functions on the remote
control. If any of the functions do not
operate as they should, repeat the
instructions from Step 2 using the next
three-digit code number from the same
brand list.
D. Auto Search Method
D. Auto Search Method
If none of the three digit code numbers assigned to
your brand of equipment works, or the code table
does not list your brand, you can use the Auto
Search Method to find the correct three-digit code
number for your equipment by following steps:
5