4)
Attach the bottom of the lens assembly to the Up post (sold separately).
5)
Run pigtail wire from fixture through the ground stake mounting hole
6)
Insert composite ground stake in desired location until flange of stake is flush to grade.
7)
Screw stem into top of stake and tighten until snug
8)
Strip the two fixture pigtail wires and connect them to the main low voltage supply cable lead
with wire connectors
LAMP INSTALLATION/REPLACEMENT INSTRUCTIONS
1)
Unscrew lens assembly from Up post (sold separately).
2)
Insert T3 bi-pin lamp with correct wattage as marked on fixture label.
3)
Attach the bottom of the lens assembly to the stem.
