PROGRAMMING TV CONTROL
NOTE: If you own a TV/VCR combination, skip this section and
perform “Programming TV/VCR Combo Control” on page 16.
Locate the brand name of your TV in the
Setup Codes For
TVs
section below, and write it in the following space.
TV Brand: __________________________________
The brands are listed in alphabetical order with the most
popular codes listed first.You will use one of these codes
to program the Millennium 3 to operate your TV:
1.
Turn on the TV.
2.
On the Millennium 3, press
TV
once. Press and
hold
SETUP
until the LED blinks twice, then
release
SETUP
.
3.
Enter the first four-digit code for your TV. If
you perform this procedure correctly, the LED
will blink twice.
NOTE: If the LED did not blink twice after entering
the code’s last digit, then repeat steps 2 through 3 and
try entering the same code again.
4.
Aim the Millennium 3 at your TV and press
TV
once. The TV should turn off. If it does not
respond, repeat steps 2-3, trying each code for
your brand until you find one that works. If it
still does not work, try searching for the code
(see
Searching For Your Code
on page 22).
5.
Write your TV code in the boxes below for
future reference.
NOTE: Remember, to use the Millennium 3 to operate your TV,
press
TV
first.
Setup Codes for TVs:
A-Mark
0003
AOC
0030, 0019, 0003, 0052, 0185
Abex
0032
Admiral
0093
Adventura
0046
Aiko
0092
Akai
0030
Alaron
0179
Ambassador
0177
8
Millennium 3 Mnl M3090 8/16/99 9:26 AM Page 8
