Universal Devices ISY-994i Series User Manual Download Page 570

Page: 570 / 692

Page | 547

21.4

Home Automation Dashboard (HAD)

100

21.4.1

What is HAD?

HAD is a replacement to the default UDAjax web interface. It features an enhanced user

interface, easy to use and fully customizable web interface for your home automation.
This current release features;

•

Devices and Scenes, including several Z-Wave devices like door locks and
Thermostats.

•

Programs.

•

Variables.

•

Weather.

•

Camera support.

•

Theming capabilities.

•

Customizations capabilities.

HAD is still under development. The current version lacks some of the functions that
UDAjax provides.

21.4.2

How can I try HAD?

HAD is built-in the firmware as of 4.2.0. You can try it easily by going to the settings page

and change the default UI to "Home automation dashboard"

100

(Universal Devices)

Summary of Contents for ISY-994i Series





















































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for ISY-994i Series

Reviews:

Related manuals for ISY-994i Series

Brands by name

Popular brands

Universal Devices ISY-994i Series, User Manual

Search results

Summary of Contents for ISY-994i Series

Reviews:

Related manuals for ISY-994i Series

Brands by name

Popular brands